Products

PHM-PRO Beet Harvester Details

PRODUCT NAME : PHM-PRO Beet Harvester Details

BRAND : Hazarbey

  • Product Info
  • Files
  • Other Photos

These models have been manufactured for singlerow beet harvest and their entire moving parts have been equipped with hydromotors. The pump which drives these motors was driven by tractor tile shaft via a wide-angle cardan shaft.

 



3 pumps have been used for driving hydro-motors and hydraulic cylinders andthereby same rpm and power were obtained in entire hydraulic motors.
 


In this model, harvester group has been equipped with automatic searching system and by this way, maximum harvesting rate and minimum product loss wer ensured. 
         


Harvest can be made in hardest and rought fields and muddy fields inwhich tractor can tow the machine thanks to vibration feature in harvesting foots. Vibration reduces the friction between blade and soil during harvest. 
 


Our PHM-PRO model has the biggest reservoir volume (7 m3 ≈4000kg) among single-row beetharvester group. By this feature, reservoir unloading repetitions which forms the most lost time during harvest have been reduced to half and harvest quantity has been increased up to 40%.
         


In PHM-PRO model, second row preparation system has been designed as double-row brush. Brush height may be controlled by driver via control panel during harvest. Thereby objects such as beet leaf, foeign grass, stone etc. are completely removed from row prepared for harvest.
 

In PHM-3 model, number of beet carrying lift has been doubled and blockage and product losses have been eliminated in high-rate harvests. In these lifting systems, high-strength trigger belts were used instead of chain and thereby silent and non-vibrating operation was ensured.
         


Tire pressing surfaces have beeen designed wide as proportional to machine weight so that machines do not cause jamming on soil surface because of their loaded weight. Left wheels entering amongst furrows of PHM-3 model have been designed with double tires in such a way that distance between tires will
be 45cm. 
 

Hydraulic cooler with high-cooling capacity exists as standard in our entire models. Harvesting may be made in all climatic conditions. Electro-hydraulic control systems and selenoid valves have been put into enclosed panel and have been protected against affects such as dust, humidity etc. from outer environment.

 

PHM - Pro BEET HARVESTER
HEIGHT : 3870 mm
WIDTH : 3000 mm
LENGTH : 6990 mm
WEIGHT : 6300 kg
LOADING HEIGHT : 4000 mm
RESERVOIR CAPACITY : 6000 kg
LEFT WHELL : 210 / 9,5 R36
RIGHT WHELL : 18,4 / 26
WORK CAPACITY : 6-7 decare / hour
TILE SHAFT ROTATION : 540 rpm
REQUIRED POWER : 120 hp (min)
REQUIRED ELECTRIC VOLTAGE : 12 volts

 

dosya
fotoğraflar
Copyright © Hazar Bey Agricultural Machinery | All Rights Reserved.